Model 430

Model 430 Four Conductors, 2@4amps, 2@30amps
Disconnects included (4 sm., 4 lg.) Boot kit available Available with stainless steel ball bearing (430-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

430

0-250

2@4/2@30

100

<1m

1200

140 (60) /-20(-29)

400

>25M

430-SS

0-250

2@4/2@30

100

<1m

1200

140 (60) /-20(-29)

400

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

430 Accessories


50431 Plug Assembly 12 in. wires 14 AWG & 18 AWG Suitable for up to 20 Amps	50430 Plug Kit - No wires, terminals for wire gauges 20 - 16 AWG & 16 - 14 AWG Suitable for up to 20 Amps Also order 5030-T

57430 Boot Kit for dust or splash protection IP51	55251 Terminal 16 - 14 AWG (qty. 2 included)

5030-T Plug Terminal Crimping Tool For Use With 50430 Kit	55250 16 - 14 AWG (qty. 2 included)

	55110 22 - 18 AWG (qty. 4 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

430 Standard Wire Connections

430 Wire Connections With Optional Boot

430 Suggested Mounting Methods

Model 430 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
430 et al		1.248" (31.70)	.80" (20)

Typical Bushing Mount Hole Dimensions
430 et al		.625" (15.88)	.40" (10)
With Plug Connector		.625" (15.88)	1.40" (36)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

Back Top Top

More Info Price

Model 435

Model 435 Four Conductors, 4@30amps & 500V
Disconnects included (8 lg.) Boot kit available Available with stainless steel ball bearing (435-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @500VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

435

0-500

100

<1m

300

140 (60) /-20(-29)

850

>50M

435-SS

0-500

100

<1m

300

140 (60) /-20(-29)

850

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

435 Accessories


55250 16 - 14 AWG (qty. 4 included)	55251 Terminal 16 - 14 AWG (qty. 4 included)	57435 Boot Kit for dust or splash protection IP51

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

435 Standard Wire Connections

435 Wire Connections With Optional Boot Kit

435 Suggested Mounting Methods

Model 435 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
435 et al		1.772" (45.00)	.80" (20)

Typical Bushing Mount Hole Dimensions
435 et al		1.250" (31.75)	.80" (20)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)